Additional interfaces like a ± 10V interface (speed target value) and an RS232 interface are available. Besides synchronous point-to-point positioning (S-PTP) and speed control, track control (CP - Continuous Path) and synchronised multiple axis applications via the implemented CANopen protocol DS402 are possible. Various user interfaces are available for integration into custom applications and here the CANopen interface should be highlighted. The extensive configuration options allow flexible adaptation to various applications and all necessary settings can be made using user-friendly set-up software. The housings of the output stages are optimised for control cabinet installation. Typical areas of application are CNC machines and automation technology. The fully digital controller iMD40 is an affordable output stage, directly powered from the mains for EC servomotors (synchronous motors like e.g. The iMD10/20 controllers are cost-effective output stages for DC motors (iMD10) and EC servomotors (iMD20). Communication between CNC and the controls is done at isel via the CAN bus. Compared to the position control in the CNC, higher accuracies are achieved at higher speeds. In the digital controllers used, the position control occurs directly in the drive. Machine axes are mainly numerically controlled in position control loops. Isel Controller - The intelligent choice for your automation job!
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
February 2023
Categories |